About Us

Safer stairs in less than a minute.

GRIPSTRIP® is the most innovative product for exterior stairs available on the market today!
GripStrips provide safer footing and may help prevent slips and falls. They are tough, long lasting, re-usable and GripStrips are resistant to weather, pressure washing, shovelling and even salting – no peeling or ripping!
Each GRIPSTRIP® is pre-punched and slotted, there is no drilling required. Wood naturally swells with moisture and contracts as it dries, the slots are designed to accommodate this expansion.

INSTALLATION Tip

GripStrips are very easy to install. Screw placement and tightness are most important. The screws should be positioned towards the outer edges of the pre-slotted holes and should be tightened down firmly; and then loosened a quarter of a turn. This allows the wood/material to expand and contract with cold and hot temperature fluctuations. Ideally your GripStrips should have a slight movement left and right. For additional details, please refer to the instructions on the package and view a short video.

PRODUCT FEATURES

EASY TO INSTALL

Before installing your GripStrips , ensure the surface is clean, flat and free of any debris or obstructions.
Place your GripStrips on any wooden surface and using a Phillips head screwdriver utilize all 4 screws.
Your GripStrips can be applied in all seasons and weather conditions. Great for high traffic areas!

If installed during cold temperatures (below 50°F or 10°C), strips may need adjusting/re-screwing in warmer temperatures. To ensure proper operation, screws should be checked and adjusted periodically. If your GripStrips appear worn or damaged, replace immediately.

Important: Screws should be positioned towards the outside rim of slots, once tightened down loosen approx ¼ turn to allow for expansion.

TOUGH & RE-USABLE

When properly installed and maintained, GripStrips provide safer footing and may help prevent slips and falls. They are tough, long lasting, re-usable and are available in many sizes. GripStrips are resistant to weather, pressure washing, showveling and even salting – no peeling or ripping!
A GRIPSTRIP® measures 32” x 2” and is produced in Canada with durable plastic. Screws (included) are approved for use in ACQ treated wood.
Residential & Commercial applications.
Used by:
  • School Districts
  • Contractors
  • Landscapers
  • Municipalities & Regional Parks
  • Marinas
  • Property Management / Strata
  • Homeowners & Businesses
  • Retirement Communities & Daycares